The
Schmitthenner Armory presents the work of Cold Steel ®
Craftsmen
who genuinely appreciate the
integrity
of the blade
Offering
their blades to indiscriminate testing, the craftsmen of these exquisitely
crafted weapons presented them to the harshest of trials along with numerous
competitors. The results were astounding. Shattered blades and broken tangs
fell by the wayside as these finely crafted pieces held strong.
Every Hand-and-a-Half
Sword reflects the highest standards in workmanship and materials.
For a sword of this size, it’s amazingly light and fast and tips the
scales at approximately 3 lbs. Its 33 1/2" long blade is quite
wide so it can produce deep shearing type cuts. To balance the long
blade we have capped the butt with a beautiful “scent stopper” pommel
which can be a lethal weapon in its own right. 33/2" blade, 42
5/8" overall
The typical Viking
sword of the 9th and 10th centuries featured a long wide blade with
a broad central fuller and two keen edges. Cold Steel’s Viking Sword
has features in common with its historical counterpart. It has a double
edged blade, hand forged out of high carbon steel and then polished
to a brilliant lustre. The wooden handle is covered in leather and
is supported by a simple, elegant guard at one end and an equally
handsome 5 lobed pommel at the other. Both guard and pommel feature
traditional Celtic knot embellishments. 36 7/8" overall
The medium weight
saber Cold Steel offers is a cavalry trooper’s chosen weapon. It posses
excellent cutting and slashing capability and still remains useful
for a thrust. In fact, it was so popular that it remained in use long
after Napoleon’s star had fallen and was wielded by both sides in
our own Civil War. The thick, moderately curved blade is forged out
of 1050 Carbon steel and features a long, wide fuller and a very sharp,
practical point. The grip of the 1830 Napoleon Saber is equally well
made. It is wrapped in black leather and strongly protected by a stout,
brass three bar hilt. The whole package comes with a heavy duty polished
steel scabbard with dual rings so it can be easily attached to your
baldric or sword belt.
Item
# CS88NS
Price $299.00
COLD
STEEL® SCOTTISH BROAD SWORD
The traditional
weapon of the highland clansman, these swords have sown fear into
the hearts of Englishmen for centuries. Cold Steel's, double edged
blade, the Broad Sword, is hand forged and beautifully polished with
triple fullers. The stout basket hilt is made of blued steel with
a black leather handle, decoratively wrapped in copper wire. Features
a 31 1/2", 1050 High Carbon steel blade. 37 3/4" overall
Item # CS88SB
Price
$379.00
COLD
STEEL® US 1860 HEAVY CAVALRY SABER
Equipped with
a 36" 1050 high carbon steel blade and a 5.50" cord wrapped
handle. Comes complete with a steel scabbard.
Item
# CS88HCS
Price $369.00
COLD
STEEL® SMALL SWORD
A more sophisticated,
shorter and lighter version emerged and by the end of the 17th century
an entirely new weapon had evolved, the Small Sword. Civilians carried
it for as long as swords remained an integral part of fashionable
dress. Its primary advantage was its stiff, lightweight blade which
was forged in a triangular cross section. The hilt features two shells
with functional finger loops and a light, but strong, knuckle guard.
Perfectly balanced and weighing only 22 ounces. 31 1/4" blade,
38 1/4" overall
Item
# CS88SMS
Price $414.00
COLD
STEEL® SCOTTISH DIRK
The Scottish Dirk,
that most knife enthusiasts are familiar with these days, is more
or less a piece of rubbish— a prop—a costume accessory for stage and
screen. It’s declined into a “knife like object” that people hang
above their mantles or on the walls of dimly lit wood-paneled dens.
The 13" blade is forged to a hard spring temper from 1050 high
carbon steel. It’s 1 1/2" wide and comes fully sharpened and
battle-ready, prepared to hew down any foe. The attractive Rosewood
handle is capped with a contrasting blued-steel guard, bolster and
disc-shaped pommel, and a handsome leather scabbard completes the
package. 18 3/8" overall
Item
# CS88SD
Price $184.00
COLD
STEEL® 1796 LIGHT CALVARY SABER
This saber was
widely used by the British and their Prussian allies under General
Blucher in the Battle of Waterloo. In fact, this saber was so successful
as a cutting weapon, that the German Cavalry continued to use it right
up to the beginning of the Twentieth century! Features a 33"
1050 High Carbon steel blade. 37 3/4" overall
Item
# CS88S
Price $299.00
COLD
STEEL® SHAMSHIR
Constructed with
a 30.50" 1050 high carbon steel blade and a 5.75" wood handle.
Comes complete with a leather/wood scabbard.
Item
# CS88STS
Price $369.00
COLD
STEEL® MORO BARONG
The Barong is one
of the classic short swords used by the Filipino warriors. The mirror
polished blade of our Moro Barong is approximately 18" long by
2 3/4" wide and 1/4" thick at the spine. For maximum strength
and effectiveness in battle, it is forged from 1050 high carbon spring
tempered steel and distal tapered to assure perfect balance. The classically
shaped down-turned handle is made from exotic Rosewood, specially
selected to match the scabbard in both grain and color. 25" overall
Item # CS88PB
Price $169.00
COLD
STEEL® TWO HANDED GREAT SWORD
If you’re looking for the ultimate in
big performance oriented swords, your search is over. This Two Handed
Great Sword is the biggest sword Cold Steel makes. But don’t let its
size fool you, as there is nothing awkward or clumsy about this awesome
sword. Sure it’s big and meant to be carried over the shoulder instead
of in a scabbard, but it’s extremely well balanced and easily wielded
by people of larger stature and physical strength. Weighing 6 lbs.
13.5 oz. with a 39 7/8" high carbon steel blade. The handle is
made of wood and covered with leather and is extra long to afford
a full two handed grip.
Item #
CS88WGS
Price $395.00
COLD
STEEL® NAVAL DIRK
During the golden age of sail, the Naval
Dirk was a common sight on port town streets or on the windswept quarterdecks
of a British Man of War. This classic shipboard weapon features a
16 1/2", double edged, 1050 high carbon steel blade with a wide
fuller and a thick spine for strength. To protect one’s fingers and
to serve as an aid in parrying, it comes with a generous solid brass
cross guard. The traditionally styled polished black horn grip is
attractively ornamented with a brass pommel and matching spacers.
21 7/8" overall
Item # CS88ND
Price $184.00
COLD
STEEL® HORSEMANS BASKET HILT BROAD SWORD
Features a 33.50" 1050 high carbon
steel blade and a 6.25" basket hilt handle. Comes complete with
a leather scabbard.
Item # CS88HBH
Price $409.00
COLD
STEEL® GROSSE MESSER
Known throughout Germany as the “Big
Knife”, the Grosse Messer hails from central and northern Europe where,
in far off days of old, noblemen and peasants alike relied on it to
protect hearth and home from the ravages of brigands. Cold Steel’s
version of this elegantly simple, effective weapon sports a hand forged
blade of 1050 high carbon steel. The guard and heavy pommel are made
from blued steel and feature rosewood handle scales riveted to the
sword’s full tang. 42 1/4" overall
Item
# CS88GMS
Price $239.99
Spears
COLD
STEEL® BOAR SPEAR
Cold Steel’s spears make for a unique,
and athletic target throwing experience! The Boar Spear, is a modern
re-creation of a design that dates back to the European Renaissance.
It is cold forged out of medium carbon SK-5 Steel and, like our other
spears, is heat treated to a spring temper. The Boar Spear comes with
an extra stout premium ash shaft. 82 1/8" overall
Item
# CS95BOA
Price $85.99
COLD
STEEL® ASSEGAI W/LONG SHAFT
The Assegai, invented by the legendary
Zulu king Shaka in the early 1800’s, revolutionized tribal warfare
in Southern Africa. Like traditional spearheads, Cold Steel's are
heat treated and then drawn to a tough spring temper. This process
enables the spear head to flex or bend under impact stresses rather
than break. 6 ft overall
Item #CS95E
Price $79.00
COLD
STEEL® SAMBURA SPEAR
The Samburu Spear, is based on a design
used by the Samburu tribe from Kenya’s northern frontier. It is perhaps
the most advanced spear of its type on the planet. With this extraordinary
spear, warriors routinely dispatch marauding leopards, lions and even
firearm toting bandits at unheard of distances. 7 ft long
Item
# CS95S
Price $69.99
COLD
STEEL® ASSEGAI SPEAR
The original Assegai was invented by
the legendary Zulu King, Shaka in the early 1800's. It's long broad
blade and short handle were ideal for thrusting and revolutionized
tribal warfare in Southern Africa. This Cold Steel version has all
the features that made the original so deadly. The 13 1/2" long
blade is constructed from SK-5 Medium Carbon Steel, and is no doubt
tree splitting sharp. The shaft is constructed from Premium American
Ash designed for throwing accuracy and a tight grip. 38" ov.
Item # CS95F
Price $ 49.99
This item
can not ship to CA, MA or NY
Axe
and War Hammer
COLD
STEEL® NORSE HAWK
The influence of the Viking weapon
indeed far out-lasted the reign of the Vikings themselves. Its sleek
lines and brute strength may be seen today in axes, hatchets and tomahawks.
Cold Steel’s hawk has a highly curved cutting edge to facilitate deep,
slashing cuts and terminates in two sharp points which are useful
in hand-to-hand combat. As a weapon, the Norse Hawk is like its ancient
Viking ancestors; merciless. 5 1/2" blade, 19" overall
Item # CS90N
Price $34.99
COLD
STEEL BAD AXE
The Bad Axe is made of medium carbon
steel, over 2 mm thick and fully heat treated for strength. You'll
find the bad axe is light enough to swing with one hand, and its many
points and edges make it ideal for target throwing competitions. 7
1/4" blade
Item # CS92BX
Price $44.99
COLD
STEEL® WAR HAMMER
Now Cold Steel® introduces an effective
re-creation. Featuring an enormous hammer face (11/2" square)
and a 31/2" spike, the War Hammer is one awesome weapon. The
straight grain American Hickory handle is 30" long and provides
tremendous leverage, and, to protect the handle, a pair of sturdy
steel langets are included.
Item
# CS90WH
Price $64.00
Blades
from the Far East
COLD
STEEL® IMPERIAL KATANA
Cold Steel has used only traditional
materials for their Japanese sword’s fittings.The Tsuba (guard), Fuchi
(collar), and Kashira (pommel), are expertly made and finely crafted
from black iron. The Habaki (blade collar), is hand made out of polished
brass and each hilt is covered in Samé (ray skin) and tightly wrapped
in the traditional style with black cord. A beautiful brass Menuki
( a small, ornamental sculpture inserted between the ray skin and
the cord wrappings on the handle) enhances the sword’s aesthetic appearance
and makes for a sword that is as traditional looking as we can possibly
make it. All come complete with a BLACK LACQUERED SCABBARD and a BLUE/VIOLET
COVER BAG. Feature fully sharpened 1050 carbon steel blades, each
heat treated to a spring temper. The blade surface is then given a
careful polish by hand, with a distinctive mirror polish applied to
the fuller (blood groove). 29 3/8" blade, 40 3/4" overall
Item # CS88K
Price$769.00$579.00
COLD
STEEL® IMPERIAL WAKISASHI
Cold Steel has used only traditional
materials for their Japanese sword’s fittings. Feature fully sharpened
1050 carbon steel blades, each heat treated to a spring temper. The
blade surface is then given a careful polish by hand, with a distinctive
mirror polish applied to the fuller (blood groove). 21 1/8" blade,
27 5/8" overall
Item # CS88W
Price $539.00 $449.00
COLD
STEEL® WARRIOR KATANA
Cold Steel's® Warrior Series is a battle
ready sword series at a more affordable price. To reduce the costliness
of the blades, the expensive mirror polishing has been omitted from
the blades. Features Samé covered, cord wrapped handles and quality
fittings with 1055 carbon steel blades. Includes black laquered wood
scabbard. 29 5/8" blade, 40 7/8" overall
Item
# 46CS88BKW
Price $519.00$369.00
COLD
STEEL® CHISA KATANA
The Japanese swords of the Imperial Series
have proven, since their initial introduction almost two years ago,
to be quite popular with many customers. The Warrior Series swords
are very handsome in their own right and share the same steel, heat
treatment, and sharpness as their more expensive Imperial counterparts.
Features a 24 1/2" 1050 carbon steel blade with a Samé covered,
black braid cord with brass Menuki handle. If you’re in the market
for a strong, good looking, reasonably priced Japanese sword we know
you’ll be happy to own one of these. 36" overall
Item
# CS88BCK
Price $519.00$359.00
COLD
STEEL® O KATANA
The Japanese swords of the Imperial Series
have proven, since their initial introduction almost two years ago,
to be quite popular with many customers. The Warrior Series swords
are very handsome in their own right and share the same steel, heat
treatment, and sharpness as their more expensive Imperial counterparts.
Features a 13" Samé, black braid cord with brass Menuki handle.
If you’re in the market for a strong, good looking, reasonably priced
Japanese sword we know you’ll be happy to own one of these. 49"
overall
Item # CS88BOK
Price $599.00$419.00
COLD
STEEL® DBL EDGE KATANA
Cold Steel has used only traditional
materials for their Japanese sword’s fittings. Feature fully sharpened
1050 carbon steel blades, each heat treated to a spring temper. The
blade surface is then given a careful polish by hand, with a distinctive
mirror polish applied to the fuller (blood groove). 25" blade,
35" overall
Item # CS88DEC
Price $929.00$629.00
COLD
STEEL® DRAGONFLY KATANA
These swords are perfectly suited for
the new generation of warriors.....built for strength, endurance,
and power! Each blade is 1050 carbon steel, heat treated to a spring
temper and strongly curved for maximum cutting power. The handles
are teal-green, silk, cord wrap and black same(ray skin). Black lacquered
wood scabbard.
Katana: 29 1/2"
bl, 41 1/2" ov
Item # CS88DK
Price $729.00$599.00
COLD
STEEL® DRAGONFLY WAKISASHI
These swords are perfectly suited for
the new generation of warriors.....built for strength, endurance,
and power! Each blade is 1050 carbon steel, heat treated to a spring
temper and strongly curved for maximum cutting power. The handles
are teal-green, silk, cord wrap and black same(ray skin). Black lacquered
wood scabbard.
Wakisashi: 22"
bl, 30 3/8" ov
Item #CS88DW
Price $529.00$449.00
COLD
STEEL® CHINESE WAR SWORD
Few swords are more intimidating or more
effective than the two handed Chinese War Sword. Its huge, wide blade
will shear through armor as if it were butter, not to mention mere
flesh and bones. There is nothing clumsy or awkward about this sword.
Its 14" cord wrapped grip, "S" shaped guard, and steel
ring pommel all work in concert to make it a well balanced weapon
that's unbelievably fast and agile. 23 1/4" blade, 37 3/4"
overall
Item # CS88CWS
Price $359.00
COLD
STEEL® O TANTO
The Japanese swords of the Imperial Series
have proven, since their initial introduction almost two years ago,
to be quite popular with many of our customers. Features a 13 1/4"
1050 High Carbon steel blade with a black braid cord with brass Menuki.
Also includes black lacquered wood scabbard. 19 1/4" overall
Item Name: Cold Steel O Tanto
Item Number: CS88BT
Price: $359.99
COLD
STEEL® MASTER TANTO
Exhibiting an unequaled level of craftsmanship,
the knives in the Tanto Series feature a lustrous satin finish on
the hollow ground blade bevels and a line grain finish on the flat
spine. Features a 6" San Mai III® steel blade with a 5 1/2"
long. Kraton® handle. 11 1/2" overall> Includes leather sheath.
Item # CS13BN
Price $289.00
COLD
STEEL® MAGNUM TANTO II
The Magnum Tanto II provides a full 30%
increase in cutting power. Combine that with the visual impact of
a tsuba-style (sword) guard and you have perhaps the ideal Tanto.
The Magnum Tanto II features a 7 1/2" blade made from San Mai
III.™. 13 1/8" overall
Item Name: Cold Steel Magnum Tanto
Item Number: CS13MBII
Price: $339.00
COLD
STEEL® MAGNUM TANTO IX
This knife was created in response to
popular demand for a longer Tanto. Features a 9" San Mai III®
steel blade with a 5 5/8" long. Kraton® handle. Weighing in at
11.9 oz. 14 5/8" overall Includes a black leather sheath.
Item Name: Cold Steel Magnum Tanto IX
Item Number: CS13MBIX
Price: $359.00
